Minitools Coating

Solid Mill Cutters for Bevel Gears - Gleason type



Historically close to the gear manufacturers, miniToolsCoating produces solid tools Gleason type of the highest quality for spiral bevel gears cutting, using the know-how gained through years of specific experience.

Constant quality and precision

The strict specifications of our production process and the heat treatment ensure the constancy of a high quality throughout the life of the tool.

We comply with tight tolerances in all the major geometric features and rigorous dimensional standards for each type of tool.

Each tool is carefully tended.

Full range of solid tools

In addition to the standard sizes we realize nominal diameters on customer specifications. We realize tip radius, profiles with Toprem, and crowning on the cutting edges sides.

100% Final Testing

All tools are controlled with a dedicated three-dimensional involute checking equipment. On request, it is issued the  inspection certificates.

High performance coatings

We produce the latest generation of PVD coatings, specially optimized for the application of the tools we produce. These, combined with a precision sharpening considerably increase tool life.

Clamping Devices

For the use of solid mill cutters with 6 "and 7.5" crown types, we also realize the correct clamping devices.

Reduced over time wear

For our mills cutters we use high-strength sintered steels: standard implementation in ASP2023, with high hardness and toughness; special implementation in S390, for use at higher cutting speeds.

Service

For an optimal regeneration of the tools we also provide a fast and accurate sharpening and coating service.

 

TYPE NOMINAL DIAMETER NUMBER OF BLADES MATERIAL
Solid Mill Cutter 1,1" 8 standard: ASP2023 - special : S390
Solid Mill Cutter 1,5" 12 standard: ASP2023 - special : S390
Solid Mill Cutter 2" 16 standard: ASP2023 - special : S390
Solid Mill Cutter 2,5" 16 standard: ASP2023 - special : S390
Solid Mill Cutter 2,75" 20 standard: ASP2023 - special : S390
Solid Mill Cutter 3,5" 20 standard: ASP2023 - special : S390
Solid Mill Cutter 4,5" standard: 20 - special: 24 standard: ASP2023 - special : S390
Solid Mill Cutter 5" standard: 20 - special: 24 standard: ASP2023 - special : S390
Solid Mill Cutter 6" standard: 20 - special: 24 standard: ASP2023 - special : S390
Crown Solid Cutter 6" standard: 24 - special: 28 o 30 standard: ASP2023 - special : S390
Crown Solid Cutter 7,5" standard: 32 - special: 36 standard: ASP2023 - special : S390
Crown Solid Cutter 9" Standard: 40 standard: ASP2023 - special : S390